FIBRE-REINFORCED PLASTIC REBAR, (FRP REBAR)

Manufacturer or Brand: Ukraine
Country of Origin: Russia
Place of Goods: Ukraine
Price/Rate: As per order
Q.ty minimum order: 5 Ton
Seller Code:
ID: 000.003.339
Checkout
  • Description
    The Group of Companies offers composite non-metallic reinforcement, which has no analogues in the world in terms of its physicomechanical properties.
  • Contract Terms
    35 days after payment. 100% payment prepaid.

Chemically and UV resistant:

The unique chemical composition of resins and hardeners gives the reinforcement 100% resistance to aggressive environments and ultraviolet, which makes it possible to use it at facilities with high requirements for the resistance of the reinforcement to aggressive environments: port construction, livestock complexes, various chemicals. repositories etc. There is a conclusion from corrosion studies.

Fire-resistant:

Stove reinforced reinforcement TSA, firing tests on sustained heating under full-load 362kg / m 2 at 1200 for C without over 4 hours is not destroyed. According to the test results, a fire-resistance index of REI 240 was assigned.

Cross Profile:

In the production of reinforcing bars, a special technology was applied, which allows creating a bi-directional “cross-shaped” profile on the surface of the reinforcement bar, which significantly increases with concrete compared to reinforcing bars of other manufacturers.

Replacement steel reinforcement:

Compared with steel reinforcement, non-metallic reinforcement of our production has 2 times greater specific strength, 9 times less weight and is an insulator. The economic effect of replacing steel reinforcement with the proposed composite reinforcement is up to 30%

Products are certified.

Below we give a comparative table on the characteristics of steel and fiberglass reinforcement.

 

Comparison table of fiberglass reinforcement (ASP) characteristics

 

Specifications

Metal fittings of class A-III (A400C) GOST 5781-82

Non-metallic composite reinforcement (ASP - fiberglass, ABP - basalt- plastic)

Material

Steel 35GS, 25G2S, etc.

ASP - glass fibers with a diameter of 13-16 microns connected by a polymer;

Specific gravity

According to building codes

8 times lighter than metal fittings

Tensile strength, MPa

390

600-1200 - ASP (with an increase in diameter, the tensile strength decreases, for example ASP8-1200, ASP16-900, ASP20-700)

Modulus of elasticity, MPa

200,000

45 000-ASP

The nature of the behavior under load (dependence "stress-strain ")

Curved line with yield strength under load

Straight-line with elastic-linear dependence under load to failure

The coefficient of linear expansion αх * 10-6 / ° C

13-15

9-12

Density, t / m³

7.85

1.9-TSA and ABP

Corrosion resistance to aggressive environments

Corrodes with the release of rust products

Corrosion-proof material of the first group of chemical resistance

Thermal conductivity

Heat conductive

Non-conductive

Elektroprovodnos be

Conductive

Non-conductive a - dielectric

Issued Profiles

6-80

6-40

Length

Rods 6-12 m long, transportation requirement)

Any length on request

Durability

No more than 80 years

Not subject to destruction.

Replacement of valves according to physicomechanical properties (except for elongation under load)

  • 6A-III

  • 8A-III

  • 10A-III

  • 12A-III

  • 14A-III

  • 16A-III

  • ASP-4

  • ASP-6

  • ASP-8

  • ASP-8

  • ASP-10

  • ASP-12

At the moment, we can order valves at the following prices:

Diameter

1-1000

m / rub

1000-5000

m / rub

5000-10000

m / rub

10000-30000

m / rub

ASP 4

9.00

8.50

8.00

7.60

ASP 6

13.00

12.50

12.00

11.20

ASP 8

18.00

17.00

15,80

14.70

ASP 10

24.50

22.50

21.00

19.80

ASP 12

34.50

33.30

32,20

31.30

ASP 14

45.40

43.40

41.60

40.00

The fittings are produced in bays of 50-100 linear meters with a reinforcement diameter of 4-10 centimeters and in whips with a diameter of more than 10 mm, which allows you to preserve the strength of the product.



Products Seen

FIBRE-REINFORCED PLASTIC REBAR, (FRP REBAR)